HAAS VF 2 Vertical Machining Centre - 762mm x 406mm x 508mm (xyz)

HAAS Mini Mill - 406mm x 305mm x 254mm (xyz)

HAAS Mini Mill - 406mm x 305mm x 254mm (xyz)

HAAS VFOE Vertical Machining Centre - 762mm x 406mm x 508mm (xyz)

HAAS 4th axis CNC indexing head

HAAS VFOE Vertical Machining Centre - 62mm x 406mm x 508mm (xyz)

HAAS 4th axis CNC indexing head

HAAS Super Mini Mill - 406mm x 305mm x 254mm (xyz)

HAAS Super Mini Mill - 406mm x 305mm x 254mm (xyz)

HAAS 4th axis CNC indexing head

HAAS Super Mini Mill - 406mm x 305mm x 254mm (xyz)

Colchester Tornado T4 - Chucking to 210mm diameter. 53mm diameter through bore capacity with bar feed.

HAAS SL-30 Live Axis Turning Centre - Chucking to 500mm diameter. 76mm diameter through bore capacity.

HAAS ST-20 Turning Centre- Chucking to 210mm diameter. 51mm diameter through bore capacity.

HAAS SL-10 Turning Centre - Chucking to 165mm diameter. 44mm diameter through bore capacity.

Colchester Triumph 2000 Gap Bed Centre Lathe - 240mm diameter swing over cross slide, 750mm between centres, 390mm diameter swing bed, 54mm diameter through bore , 580mm diameter swing over gap.

Europa Milltach Turrent Mill - 820mm x 430mm x 430mm (xyz).

Full range of manual milling and turning attachments.

Jones and Shipman 540P Surface Grinder - 150mm x 450mm Table.

Myford Uni Grinder - 300mm between centres, 120mm diameter swing.

Sachman Vertical Keyway Slotter

Glass Bead Blaster - 250mm x 250mm x 500mm

Toolroom Pillar Drill

Hydraulic Hacksaw - 200mm diameter capacity.

1500 sq ft temperature controlled Inspection Department.

Aberlink Axiom CMM

Mitutoyo Height Towers

Nikon 6CT2 Profile Projector

Sigma and Mitutoyo Comparators

Hardness Testing Machine

Trimos Vectra Touch

Full calibrated range of Mitutoyo Inspection Equipment.

UKAS laboratory calibrated "Select" Inspection Grade Slip Gauges.

Full range of calibrated standard "H" fit Plug Gauges (non standard sizes purchased as and when required)

Full UKAS laboratory calibrated range of standard Screw Plug, Screw Ring and Caliper Gauges. (non standard sizes purchased as and when required)

UKAS laboratory calibrated Surface Plates

All Inspection Equipment is duplicated for workshop use and controlled in our BSI approved Calibration System.

As part of our policy of continual improvement and compliance of AS9100 Rev D, ISO 9001:2008 and the SC21 program every machine tool operator is issued with a dedicated kit of measuring equipment including a digital 0 to 25mm micrometer, 0 to 150mm digital caliper, micrometers from 0 to 150mm, slip gauges, height gauge and dial test indicator.

OneCNC XR3 Milling

EdgeCAM 10.50

OneCNC XR3 Turning

Storage space 1200 sq ft of storage space.

500 sq ft room for assembly and development work.